The Camera Fixing Screw 973 comes with 1/4"-20 thread.
The Benro BV8 Twin-Leg Aluminum Tripod Kit is a complete tripod system ideal for studio applications and handling larger camera rigs weighing up to 17.6 pounds.
DoubleHeadStud-1/4-1/4 comes with standard 1/4"-20 thread on both ends.
Content
PATONA Premium Battery f. Sony NP-FW50 NEX-3 NEX.3C NEX-5 NEX.5A NEX-7
With a weight capacity up to 11 lb, the Benro KH26P Video Head & Tripod Kit from Benro is perfect for supporting DSLRs, mirrorless cameras, and smaller video cameras. The KH226P system features a 60mm ball video head features a continuous pan drag system, a sliding camera plate with two anti-twist locating pins, and a maximum height of 72.6". The continuous drag feature enables you to adjust the pan tension for smoother moves. The two anti-twist pins are designed to keep DSLRs and mirrorless cameras from twisting when mounted on the head. Each pin is spring-loaded and will retract when covered by a larger camera.
The KH26P system's dual-stage aluminum tripod legs feature twist-locks for quick easy adjustments and incorporate a mid-level spreader for added stability. This tripod system offers a working height range of 34.4" to 72.6" and folds to 35.8" for travel. For compatibility with both smooth and irregular indoor/outdoor surfaces, the legs feature both dual spiked feet and rubber pads. The KH26P system comes with a padded carrying case and one pan handle that can be used for right- or left-handed use.
Features
Two-stage aluminum tripod with 60mm bowl
Supports loads up to 11 lb
Continuous pan drag
Sliding balance plate with two anti-twist pins
Independent pan/tilt locks
Pan handle attaches to either side of the head
34.4 to 72.6" height range
Fixed, non-removable mid-level spreader
Independent leg adjustment using twist-lock levers
Dual spiked feet with removable rubber pads
Head-mounted bubble level
35.8" folded length
Padded carrying case
Cool-Ballhead-V4 is a Multi-Function Double Ball Head with bottom clamp and 1/4" screw. Cool-Ballhead-V4 can Mount Monitors and led Lights to DSLR, 360o Articulation. 1/4"-20 Screw on Top. It can be mounted directly to a DSLR and allows for the attachment of a full array of video accessories. Used to attach monitors or small lights to your camera while shooting video, this ball head has a single locking knob for fast and safe operation.
The best load <1.21Kg
The Camera Fixing Screw 973 comes with 1/4"-20 thread. Please be sure the size fits your camera and quick release plate before shopping.
Packing List
includes 2pcs Screws
The Benro BV8 Twin-Leg Aluminum Tripod Kit is a complete tripod system ideal for studio applications and handling larger camera rigs weighing up to 17.6 pounds. The kit pairs the 75mm-ball BV8 video head with a twin-leg aluminum tripod. The BV8 head features a 5-step counterbalance system to dial in the correct amount for your setup, and independent 4-step pan and tilt drag settings for precise control over camera movements. A Manfrotto 501/504PL compatible sliding quick release plate is provided. All the main controls aside from counterbalance are located on the left side of the head, making it easy to make adjustments with a single hand while operating the camera. For added versatility, the 75mm ball tie-down stud is removable to convert the head to a flat base for use on a slider or other support device.
The 2-stage, 3-section twin-leg aluminum tripod incorporates a 75mm bowl and offers sturdy support for the BV8 head. It features oversized quick positive leg locks for simple and fast setup, an adjustable/removable mid-level spreader, and dual spiked feet with removable rubber pads. The tripod system extends to a maximum height of 63", while getting as low as 28". A carry case and shoulder strap are included.
Head
Supports up to 17.6 lb
Removable tie-down stud to convert to flat base head
5-step (0 to 4) counterbalance
Independent 4-step (0 to 3) pan and tilt drag
-70° to +90° tilt range
Manfrotto 501/504PL compatible sliding plate
Two 3/8"-16 accessory threads for mounting accessories, such as a monitor or recorder
Bubble level
Legs
Twin-leg aluminum tripod with 100mm bowl fitting
28 to 63" height range (with head attached)
Oversized twist-lever leg locks
Adjustable/removable mid-level spreader
Dual spiked feet with removable rubber pads
Head
Load Capacity
17.6 lb / 8 kg
Head Mount
75 mm bowl
Counterbalance
5-step (0 to 4)
Pan Drag
4-step (0 to 3) fluid cartridge
Tilt Drag
4-step (0 to 3) fluid cartridge
Panning Range
360°
Tilt Range
-70° to +90°
Quick Release Plate
QR13 (Manfrotto 501/504PL compatible)
1/4"-20 and 3/8"-16 cameras screws
Accessory Mounting Threads
2 x 3/8"-16
Legs
Material
Aluminum
Stages
2
Sections
3
General
Minimum Height
28" / 71.1 cm
Maximum Height
63" / 160 cm, at 24° leg angle with column extended
Folded Length
34.1" / 86.7 cm
Weight
14 lb / 6.3 kg
DoubleHeadStud-1/4-1/4 comes with standard 1/4"-20 thread on both ends.
Reviews
There are no reviews yet.