BENRO BV8
€610.00
The Benro BV8 Twin-Leg Aluminum Tripod Kit is a complete tripod system ideal for studio applications and handling larger camera rigs weighing up to 17.6 pounds.
- Description
- Additional information
- Reviews (0)
- Vendor Info
- More Products
The Benro BV8 Twin-Leg Aluminum Tripod Kit is a complete tripod system ideal for studio applications and handling larger camera rigs weighing up to 17.6 pounds. The kit pairs the 75mm-ball BV8 video head with a twin-leg aluminum tripod. The BV8 head features a 5-step counterbalance system to dial in the correct amount for your setup, and independent 4-step pan and tilt drag settings for precise control over camera movements. A Manfrotto 501/504PL compatible sliding quick release plate is provided. All the main controls aside from counterbalance are located on the left side of the head, making it easy to make adjustments with a single hand while operating the camera. For added versatility, the 75mm ball tie-down stud is removable to convert the head to a flat base for use on a slider or other support device.
The 2-stage, 3-section twin-leg aluminum tripod incorporates a 75mm bowl and offers sturdy support for the BV8 head. It features oversized quick positive leg locks for simple and fast setup, an adjustable/removable mid-level spreader, and dual spiked feet with removable rubber pads. The tripod system extends to a maximum height of 63″, while getting as low as 28″. A carry case and shoulder strap are included.
Head
- Supports up to 17.6 lb
- Removable tie-down stud to convert to flat base head
- 5-step (0 to 4) counterbalance
- Independent 4-step (0 to 3) pan and tilt drag
- -70° to +90° tilt range
- Manfrotto 501/504PL compatible sliding plate
- Two 3/8″-16 accessory threads for mounting accessories, such as a monitor or recorder
- Bubble level
Legs
- Twin-leg aluminum tripod with 100mm bowl fitting
- 28 to 63″ height range (with head attached)
- Oversized twist-lever leg locks
- Adjustable/removable mid-level spreader
- Dual spiked feet with removable rubber pads
Head
| Load Capacity | 17.6 lb / 8 kg |
| Head Mount | 75 mm bowl |
| Counterbalance | 5-step (0 to 4) |
| Pan Drag | 4-step (0 to 3) fluid cartridge |
| Tilt Drag | 4-step (0 to 3) fluid cartridge |
| Panning Range | 360° |
| Tilt Range | -70° to +90° |
| Quick Release Plate | QR13 (Manfrotto 501/504PL compatible) 1/4″-20 and 3/8″-16 cameras screws |
| Accessory Mounting Threads | 2 x 3/8″-16 |
Legs
| Material | Aluminum |
| Stages | 2 |
| Sections | 3 |
General
| Minimum Height | 28″ / 71.1 cm |
| Maximum Height | 63″ / 160 cm, at 24° leg angle with column extended |
| Folded Length | 34.1″ / 86.7 cm |
| Weight | 14 lb / 6.3 kg |
| Weight | 9.16 kg |
|---|---|
| Dimensions | 98.5 × 24 × 23.8 cm |
Be the first to review “BENRO BV8”
Vendor Information
- Address:
- No ratings found yet!
€18.00
€17.00
€1,450.00
€330.00
€130.00
Quick Comparison
| Settings | BENRO BV8 remove | SMALLRIG QUICK RELEASE SAFETY RAIL 15CM 1187 remove | SMALLRIG 1/4" DOUBLE END STUD 828 remove | BENRO BK15 remove | SMALLRIG COLD SHOE TO 1/4" THREADED ADAPTER 761 remove | Screw Adapter 1/4" FEMALE TO 3/8" MALE remove | |||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | BENRO BV8 remove | SMALLRIG QUICK RELEASE SAFETY RAIL 15CM 1187 remove | SMALLRIG 1/4" DOUBLE END STUD 828 remove | BENRO BK15 remove | SMALLRIG COLD SHOE TO 1/4" THREADED ADAPTER 761 remove | Screw Adapter 1/4" FEMALE TO 3/8" MALE remove | |||||||||||||||||||||||||||||||||||||||||||||||||||
| Image | |  |  |  |  |  | |||||||||||||||||||||||||||||||||||||||||||||||||||
| SKU | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rating | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Price | €610.00 | €20.00 | €5.50 | €35.00 | €9.00 | €6.00 | |||||||||||||||||||||||||||||||||||||||||||||||||||
| Stock | Out of stock | Out of stock | Out of stock | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Availability | Out of stock | Out of stock | Out of stock | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Add to cart | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description | The Benro BV8 Twin-Leg Aluminum Tripod Kit is a complete tripod system ideal for studio applications and handling larger camera rigs weighing up to 17.6 pounds. | Quick Release Safety Rail 15cm 1187 | DoubleHeadStud-1/4-1/4 comes with standard 1/4"-20 thread on both ends. | The Benro BK15 provides stability on the go, at a budget-price and in a portable package. Content creators and selfie lovers will be drawn to this accessory, which can be used as a selfie stick or a mini tripod. | New 1/4" Camera Hot shoe mount w/ additional 1/4" screw 761 New 1/4" Camera Hot shoe mount w/ additional 1/4" screw for cameras such as Canon, Nikon, Olympus, Penta*, Panasonnic, Fujifilm & Kodak.This is a so COOL 1/4" Hot shoe mount w/ a Swivel Ball-Head, a HOT Shoe adapter, a 1/4" screw and a Small spanner.The best load <3Kg | Thread Adapter which comes with standard female 1/4"-20 to male 3/8"-16 thread.
| |||||||||||||||||||||||||||||||||||||||||||||||||||
| Content |
The Benro BV8 Twin-Leg Aluminum Tripod Kit is a complete tripod system ideal for studio applications and handling larger camera rigs weighing up to 17.6 pounds. The kit pairs the 75mm-ball BV8 video head with a twin-leg aluminum tripod. The BV8 head features a 5-step counterbalance system to dial in the correct amount for your setup, and independent 4-step pan and tilt drag settings for precise control over camera movements. A Manfrotto 501/504PL compatible sliding quick release plate is provided. All the main controls aside from counterbalance are located on the left side of the head, making it easy to make adjustments with a single hand while operating the camera. For added versatility, the 75mm ball tie-down stud is removable to convert the head to a flat base for use on a slider or other support device.
The 2-stage, 3-section twin-leg aluminum tripod incorporates a 75mm bowl and offers sturdy support for the BV8 head. It features oversized quick positive leg locks for simple and fast setup, an adjustable/removable mid-level spreader, and dual spiked feet with removable rubber pads. The tripod system extends to a maximum height of 63", while getting as low as 28". A carry case and shoulder strap are included.
Head
Legs
Head
Legs
General
| Standard quick release safety rail (5cm) is part of our QR-Handles, it can be attached to any two 1/4-20 holes via (2)1/4’’ -20 screws (included) to provide mount for QR-Handles. It features spring loaded pins on both ends to prevent accidental removal. Compatible with our Slide Mount, also w/ RED Epic/Scarlet, Black Magic Camera and so on, and other third party accessories.
Packing List
1* 15cm Safety Rail
2* 1/4''-20 screws
Technical Data
Material: aluminium alloy
| DoubleHeadStud-1/4-1/4 comes with standard 1/4"-20 thread on both ends.
Work With
Any accessories with 1/4”-20 thread.
Packing List
2*DoubleHeadStud-1/4-1/4
| The Benro BK15 provides stability on the go, at a budget-price and in a portable package. Content creators and selfie lovers will be drawn to this accessory, which can be used as a selfie stick or a mini tripod. The BK15 measures just 190mm when folded, while it can reach a respectable maximum height of 815mm. Despite weighing in at just 190 grams, this Benro product can hold an impressive 1.5KG.
-Lightweight: Just 190 grams
-Closes down to a portable 190mm
-Includes Smartphone holder
-Includes Bluetooth remote
-Use as a mini tripod or selfie stick
| New 1/4" Camera Hot shoe mount w/ additional 1/4" screw 761
New 1/4" Camera Hot shoe mount w/ additional 1/4" screw for cameras such as Canon, Nikon, Olympus, Penta*, Panasonnic, Fujifilm & Kodak.This is a so COOL 1/4" Hot shoe mount w/ a Swivel Ball-Head, a HOT Shoe adapter, a 1/4" screw and a Small spanner.The best load <3Kg
Packing List
1 x Cold Shoe Mount
Technical Data
| Thread Adapter which comes with standard female 1/4"-20 to male 3/8"-16 thread.
Packing List
2* Thread Adapter
Technical Data
Made of copper
| |||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight | 9.16 kg | N/A | N/A | N/A | N/A | N/A | |||||||||||||||||||||||||||||||||||||||||||||||||||
| Dimensions | 98.5 × 24 × 23.8 cm | N/A | N/A | N/A | N/A | N/A | |||||||||||||||||||||||||||||||||||||||||||||||||||
| Additional information |
|
Related products
€18.00
€8.50
Reviews
There are no reviews yet.